How Much Does Composite Decking
Cost in Brisbane in 2026?

It’s the first question almost everyone asks and it’s the right one. A deck is a significant investment, and vague answers like “it depends” don’t help you plan a budget.

So here’s a straight answer:
what composite decking actually costs in Brisbane in 2026, from the boards themselves to a complete installed deck and why the upfront price is only part of the story.

Composite Decking Price Per Lineal Metre in
Brisbane

Composite boards are sold by the lineal metre. Prices vary by brand, profile width, and finish. Here’s how the market breaks down in 2026 from budget-friendly to premium:
Entry-Level
$15–$25 / lm
Solid performance, good
colour range. Suits
secondary outdoor areas or
budget-conscious builds.
e.g. ModWood Select
Mid-Range
$30–$50 / lm
Where most Brisbane
homeowners land. Better
UV resistance, more
realistic grain, longer
warranties.
e.g. Trex, WoodEvo
Premium
$60–$100+ / lm
Top-of-market finish and
durability. Longest
warranties available.
Evodek is the standout.
e.g. Evodek, Millboard
Trex sits firmly in the mid-range and is one of the most searched composite brands in Australia well-warranted, widely trusted, and a reliable performer in Brisbane’s climate. Evodek is the one that generates the most questions in our showroom: the grain detail and durability specs are genuinely impressive, and the price reflects that.
If you’re not sure which tier suits your project, come in and see the boards side by side it’s much easier to decide in person than from a product page.

What Does Installation Cost?

Board cost is only part of a complete deck.
You’ll also need a subframe (treated pine or steel), fixings, and labour. For a Brisbane builder or deck installer in 2026, expect to pay:
$150–$250 per square metre for labour and subframe  on top of the cost of your boards.
This covers site preparation, frame construction, board installation, and basic finishing.
What moves the price up:
A ground-level deck on flat, accessible ground sits at the lower end. Add height, stairs, balustrading, a sloped or difficult site, or an existing deck that needs removal and the number climbs. Always get at least two quotes from licensed deck builders, and make sure they’ve worked with composite before.

Total Project Cost:
A Standard 30m² Deck in Brisbane

A 30 square metre deck is the standard benchmark big enough for outdoor dining and a BBQ, typical for most Brisbane backyards.
Here’s what it looks like, all in:
Decking Cost Table
Boards (30m²) Frame + Labour Approx. Total
Entry-level $3,500–$5,500 $4,500–$7,500 $8,000–$13,000
Mid-range $6,500–$11,000 $4,500–$7,500 $11,000–$18,500
Premium $13,000–$22,000 $4,500–$7,500 $17,500–$29,500
These are indicative planning figures your actual quote will depend on your site, your frame requirements, and the installer you choose. Use these as a realistic range before you start getting quotes.

Why Composite Costs More Upfront and Less Over Time

This is what most pricing guides skip, and it changes the decision entirely
A comparable hardwood deck Merbau or Kwila typically costs $4,000–$8,000 all in for a 30m² build in Brisbane. That upfront saving is real. But hardwood in this climate needs oiling every 12 to 24 months, a sand-back and reseal every 7 to 10 years, and will eventually need board replacement in high-wear areas. No oiling. No re-staining. No warping. No rot.
Over 10 years, that maintenance adds $2,000–$5,000 or more to the real cost of a timber deck and that’s if you stay on top of it. Composite decking needs a wash with soapy water once or twice a year and nothing else. Premium boards from brands like Evodek and Millboard carry 25-year warranties for exactly that reason.
The upfront cost gap between composite and hardwood typically closes by year three to five. After that, composite comes out ahead.

Get a Quote Specific to Your Project

Prices shift with material costs, site conditions, and installer availability , so the best number is always the one based on your actual project.
At Woodstock in Slacks Creek, we can help you work out how much material you’ll need, which product tier matches your budget, and what to expect from the installation process. We stock entry-level through to premium composite boards, and we’ll give you a straight answer not a sales pitch.
Come in, give us a call, or request a free quote online. We’ll get back to you fast
Woodstock Decking – Slacks Creek, Brisbane